5Bars AKE Temperature Release Valve

Temperature and pressure relief valve for solar water heater

Temperature & Pressure Relief Valve

AKE Combination Temperature and Pressure Relief Valves are designed for the protection of water heaters and storage tanks. WYA-20 meet ANSI Z21.22.
WYA-20 Valves are completely automatic and reseat after either temperature or pressure relief. They are offered in 3/4″ sizes with male inlets and female outlets.

Specification Data
Performance:

• Available Set Pressures :150 psi standard.
• Temperature Relief: 210°F standard.
• Service: Hot Water.

Materials:

• Body: Bronze
• Internal Parts: Brass and stainless steel
• Seat Disc: Silicone
• Pressure Spring: Stainless steel

Designed and checked Based on American “ANSI Z21.22” Standard.

Ⅰ、Using MethodTemperature and Pressure Relief Valves is suitable for Installing at the Pressurized solar water heater, gas heater, electric water heater , water heater of fuel, heat pump water heater , sensitive function heater, etc. various kinds of heaters( such as the boiler) and hot water containers . The valve will be opened at the set temperature and pressure to protect the water tank.

Ⅱ、Technical Parameter

•Pressure(Psi): 75,87,100,125,150psi (0.5、0.6、0.7、0.8、1.0MPa)

•Pressure Tolerance: +5%,-10% of the set pressure.

•Temperature: From 65℃ to99℃. (As you’re required)

•Temperature Tolerance: 99℃-5℃; other set Temperature is ±5℃

PS: We can made different type of valves as you’re required.

•Dimensions/Weights

Ⅲ、How to Installation

•Temperature and Pressure Relief Valves should be installed on the top of the water heater top or side. The Temperature sensing element must be immersed in the water within the top 6″of the tank.

•The eliminating pipeline should be installed under the relief valve. Its terminal station distance in floor drain should be greater than 6″to make it easily remove and observe water

Direct Installed on the Top Direct Installed in the Side

Ⅳ、How to Safeguard And Maintenance:

•After installing water heater the users must lift the relief valve handle once at least every year, so as to ensure that unblocked things in the waterway of the relief valve.

•Before operating handles, please check the elimination pipeline which joining the relief valve, guaranteed that the hot water from the relief valve discharge the proper place, otherwise it may cause the bodily injury.

•If the handle is lifted, without water flowing out, it proves that the relief valve is invalid. Then it should turn off the water heater immediately and check the valve.